- Bodies are colored in WHITE in standard.
- Bodies are in 18 mm E1 quality norms, produced with two faced MDF and CHIPBOARD covered in melamine.
- The backrest of bodies are produced as in 5 mm E1 quality norms with WHITE MDF with one face painted.
- All the bodies are taped with pvc tape in 0.8 mm.
- The backrests are produced as interlaced system by opening canals into the bodies’ backrests.
- Wall cabinets are installed with ‘daset’ hanging system.
- The measurements of wall cabinet is 30 cm, 45 cm, 60 cm, 72 cm, 90 cm and 110 cm in height, and 35 cm. (including the cover) in depth. Base cabinet is 72,6 cm in height, 58 cm in depth (including the cover).
- In base cabinets the toe kick foot is included into the body part. 12-15 cm gage toe kick foot is used.
- The bodies are produced as disassembled. In disassembled system minifix is used as the combining element and accessory pack is available to combine each module.
- Each module is wrapped with shrinkage nylon with plastic corner shield and labeled.
- In drawer modules BLUM box ray the body part of the drawer is included into the module.
- In lift-up cover modules BLUM HF mechanism is included into the module.
- In cover modules 1 piece with retarder and 1 piece without retarder hinges are included into the module.
- Aluminum profile is provided for the horizontal support along with the sink and built-in oven modules.
- The equipments in the pictures are not included into the prices.
- Toe kick, laminate countertop, plinth and joint strips are to be priced at extra cost.
- Laminate countertops are delivered without the sink hole opened.
- Extra panels should be ordered additionally.
- Spoon holder, trash can, and under sink aluminum plate are priced on extra cost basis.
- Module covers are grouped in four and named as LACQUER PAINTED – MATT – HG MELAMIN and many color alternatives are available.
- Holes for handholders are not made. Handholders are not included in the price.
